Installing Lattice Screening? Steps for Putting Up the Poles
Posted on: 1 May 2020
Lattice screens are a central part of house decor. These lattice screens come in various patterns and designs so you can get the one ideal for your space.
One aspect that determines the effectiveness of your lattice screen is the posts. You need the proper planning, placement, and installation of your posts. Installing the posts correctly offers a solid foundation for lattice screening. Follow these tips when installing the lattice screening posts.
Posts
The standard materials for lattice screens measure about 4 feet wide by 8 feet long. If the materials of your screen are 8 feet long, the posts should be at least 10 feet long. That is because 2 feet of the posts are sunk to the ground for support. You can lease a gas-powered post-hole digger to help when setting a large number of posts.
Always install the corner posts first as they represent the starting and ending points. After that, level them to the ideal height and pour dirt around them to hold them in place. Use a string to connect the corner posts. That will help you in aligning the rest of the posts.
Spacing the posts
The space between each post depends on the size of the material you are using on the lattice screen. If your material is 4 feet wide, then the posts should be 4 feet apart in the centre. When measuring, start from the centre of the poles but not the edge. That will offer some space for attaching the screen material.
Installing
After you finish spacing the posts, you can start putting up the lattice screen. Begin by aligning the top edge of the first panel to the top of both posts. Use the right fasteners to secure the screening panel. Repeat the procedure up to the last pole.
Considerations
You can use concrete to set your wooden posts. But that is not necessary. Sometimes the concrete can accelerate the rotting of your wooden posts. That is because concrete buried underground tends to keep moisture. The amount of moisture concrete preserves increases when it rains. These moist conditions can lead to a fast rotting process within the posts.
The best way to reduce rot is by increasing the drainage below the posts. You can achieve that by digging deep holes, then adding gravel before putting up the posts.
Conclusion
Lattice screens can enhance the look of your outdoors and offer privacy in your home. These screens are also ideal for indoor use. Correctly installing the lattice screens is the best way to make sure you enjoy their benefits. Following the steps offered above will help you get the ideal lattice screen.
For more information, contact a professional who works on lattice screening.
Share